Douglas Fir Plywood

DHH Timber Products are the sole importer and main distributor of Clear grade Exterior Douglas Fir Plywood in the UK.

Douglas Fir Plywood [DFP] is a one piece rotary cut clear face veneer which gives it a wild and pronounce grain. It`s sapwood is narrow and light in colour, whilst the wider heartwood ranges from yellow to dark brown. The exact colour depends on the season it is harvested. In summer the banding in the grain is darker, giving the wood its distinctive colour when it is rotary peeled.

This product is very much in demand at present for use as panels on walls and ceiling. It is also used extensively in high end joinery.

Stock Range

Clear Grade Douglas Fir Exterior Softwood Plywood [Rotary Cut]

[70] 11mm 2440 x 1220mm 1/side
[70] 11mm 2440 x 1220mm 2/sides
[40] 19mm 2440 x 1220mm 1/side
[40] 19mm 2440 x 1220mm 2/sides

Clear Grade "Solid Core" Douglas Fir Exterior Softwood Plywood [Rotary Cut]

[66] 12.5mm 2440 x 1220mm 1/side
[44] 19mm 2440 x 1220mm 1/side
[44] 19mm 2440 x 1220mm 2/sides
[Solid core veneers used throughout inner plies]

Select [tight faced] Douglas Fir Exterior Softwood Plywood [Rotary Cut]

[42] 18.5mm 2440 x 1220mm

Clear Face Definition:

One Piece Face Veneer
No Synthetic filler/wood patches
Occasional hairline splits filled wood putty. No knots/pin knots
Other grades and thicknesses available on forward order.

Technical Specification

Formaldehyde class E1
CE Structural rated
Conforms to European Norm EN 13986 & EN 636-3, EN314-2
PEFC Certified